LMG1205: HI, LI input capacitance

Elisha Tarroza71

Part Number: LMG1205

Hello,

Do we happen to have unpublished information regarding the input capacitance of HI and LI pins of LMG1205?

Thank you.

over 6 years ago

0 Jeffrey Mueller over 6 years ago

TI__Genius 12990 points

Hi Elisa,

thanks for reaching out on e2e,

Based on the design of the input there is about 2-5 pF of input capacitance. Most of the capacitance on the input is the ESD cell junction capacitance so it varies with applied voltage. The test and design team has no additional data regarding this spec. What other details about LMG1205 input capacitance would you like to know?

thanks,

0 Elisha Tarroza71 over 6 years ago in reply to Jeffrey Mueller

TI__Expert 3700 points

Hi Jeff,

Thanks! I'm not certain if the customer would like to know other details about the input capacitance, I will direct the customer to this thread so he can communicate with you directly.

Thank you for your support!

Regards

0 Jeffrey Mueller over 6 years ago in reply to Elisha Tarroza71

TI__Genius 12990 points

Elisha,

thanks for the update! I will close this thread by marking thinks resolved. If the customer has any follow up have them post on this thread or you can reach out to me offline if sensitive information should be discussed.

thanks,

0 Elisha Tarroza71 over 6 years ago in reply to Jeffrey Mueller

TI__Expert 3700 points

Sure, Jeff. Thanks again :)

Power management

Power management forum

LMG1205: HI, LI input capacitance