• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 63 subscribers
  • Views 254 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

BQ25060: Adding super capacitor to Vout (power path)

Liam192
Prodigy 100 points
Part Number: BQ25060

Hi,

Does anyone see any issues with adding a super capacitor to vout (power path)?

Thanks,

             Liam

  • 0
    TI__Guru* 76016 points

    Hi Liam

    One condition to watch out for with a super capacitor is the discharged state (0V).  The BQ25060 will start but like most Li-Ion chargers the output current is limited during this time.  Fast charge current set by ISET is not available until batter voltage reaches 2.5V.