• State Resolved
  • Locked Locked
  • Replies 3 replies
  • Answers 1 answer
  • Subscribers 63 subscribers
  • Views 420 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

BQ40Z50: DATA MEMORY CONFIGURATION

VICTOR VICTOR
Intellectual 290 points
Part Number: BQ40Z50
Other Parts Discussed in Thread: BQSTUDIO

Hello, when i want to import excel file of the modified data memory for my application, after i push "write all" button an error comes up :

"Parameter value doesn't match type and data format: : Power IATA.IATA.config "

what is the correct method to modify the data memory using the "IMPORT FROM FILE " (in the battery management studio GUI)?

Thank you for your help!

  • 0
    TI__Mastermind 42535 points

    Hi Victor,

    Please do not use excel to open the csv file. Excel changes the data in the text file as it interprets the numbers. Please use notepad to open it and change values. Once you save the correct value within the data limts for the parameter, you can import the file.

  • 0 in reply to Batt
    Intellectual 290 points

    Hello batt and thank you for your reply.

    After exporting the data memory i opened it using notepad.

    After changing the values between the limits, i saved the file (at the same format) and when i press import from file and write all , nothing happens. How do i solve this error?

  • 0 in reply to VICTOR VICTOR
    TI__Mastermind 42535 points

    Please check at the bottom of the status bar in the bqstudio program. If you do not see any red notification, it means the write was successful. You will also see that the df values will have changed to the imported value when you press the read all button.