BQ34Z100-G1: BQ34Z100-G1 bq studio

jean-claude DESCHAMPS

Prodigy 160 points

Part Number: BQ34Z100-G1
Other Parts Discussed in Thread: GPCCHEM

I have made a battery with 8 cells NIMH.

I have calibrated it

Voltage and curent from BQtudio is OK.

When I charge and discharge the capacity is not OK (always the same)

What do you think about it?

Best regars JCD

PS I send you 3 meesage for this problem but I 've never received an answer.

over 6 years ago

0 Batt over 6 years ago

TI__Mastermind 42535 points

Hi JC,

Have you performed a chem ID match? Please use the GPCCHEM tool here, http://www.ti.com/tool/GPCCHEM to get the match for your NiMH. Following that you need to program the gauge with the ID you have and then run a learning cycle. I have attached a document here that tells you how to do it, 2251.SLUA925_bq34z100-G1.pdf. Please refer to that.

Power management

Power management forum

BQ34Z100-G1: BQ34Z100-G1 bq studio