TPS1663: OVP threshold value

Sadanori Kato

Guru 36540 points

Part Number: TPS1663

Hi,

Is my understanding correct that OVP threshold value for "V(ovpf)@max" is typo as follows ?

Best regards,
Kato

over 6 years ago

0 Lokesh Ghulyani over 6 years ago

TI__Expert 8630 points

Hello Kato-San,

We are looking into this and get back in couple of days.

0 Sadanori Kato over 6 years ago in reply to Lokesh Ghulyani

Guru 36540 points

Hi Lokesh-san,

Thank you for your prompt reply.

I am looking forward to getting the detailed information from you.

Best regards,
Kato

0 Lokesh Ghulyani over 6 years ago in reply to Sadanori Kato

TI__Expert 8630 points

Hello Kato-San

Yes, This is a typo error. The datasheet will be updated with correct value in couple of weeks. The correct value for OVP falling threshold is 1.15V(max).

0 Sadanori Kato over 6 years ago in reply to Lokesh Ghulyani

Guru 36540 points

Hi Lokesh-san,

Thank you for confirming.

I understood.

Best regards,
Kato

Power management

Power management forum

TPS1663: OVP threshold value