After updating the board with the latest firmware it
reads out false values.
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
After updating the board with the latest firmware it
reads out false values.
Hello Batt,
i programmend the srec file from the bq78z100FirmwareBundle-0.05 which i downloaded from this website.
It seems that i had used a wrong cable to connect the board to the programming device.
I've retried it with proper cable and now it works at expected.
Thank you for your reply.
Best regards,
Stefan