Can I use only one channel (OUT1 and CS1) and leave the second channel (OUT2 and CS2) open?
thanks
Joe
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Can I use only one channel (OUT1 and CS1) and leave the second channel (OUT2 and CS2) open?
thanks
Joe
Hi Joe,
Yes, you can just chose to use one channel if you wish. I would pull the unused CS pin to 0V and leave the OUT open circuit.
Regards
Peter