• State TI Thinks Resolved
  • Locked Locked
  • Replies 2 replies
  • Answers 1 answer
  • Subscribers 62 subscribers
  • Views 174 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TPS54218: Questions about Frequencies Foldback during Start-Up

Gui Kang Gui Kang
Prodigy 165 points
Part Number: TPS54218

Good Day,

I know that there is a frequency foldback protection feature which reduce the switching frequency during start-up. I have some questions related to the frequency foldback protection

- Are there graphs or details available regarding how much is the frequency reduced during start up for different steady state frequencies

- What are the methods to control the amount of frequency reduced 

- What are the factors affecting the frequency reduced

- Is it possible to remove the frequency foldback protection

Thank you for helping me out.

  • 0
    TI__Genius 14876 points

    Hello,

    Frequency foldback is a feature in charge of reducing the inductor current during startup or during an over-current condition. It is implemented to operate TPS54218 in safe conditions, it cannot be removed.

    The Frequency shift topic (7.3.12) in the datasheet describes how this features behaves. You can also see in Figure 7, what is the correlation between the Vsense voltage and the frequency shift. It then can tell how much the frequency is reduced during start up.

    Thank you very much!

    Best Regards,

    Dorian

  • 0 in reply to Dorian Brillet de Cande
    TI__Genius 14876 points

    Hi,

    As we are discussing your customer's system requirements via private message. I will close this thread.

    Thank you very much!

    Best Regards,

    Dorian