TPS54386-Q1: Absolute Maximum Junction Temp and Theta-JB

Art Mecina

Genius 16585 points

Part Number: TPS54386-Q1

Hi e2e,

Good day.

We have a customer asking for the “Absolute Maximum junction Temperature” for TPS54386TPWPRQ1?

Is it the same as the max “Operating Junction Temperature”of 125C?

Also, he is looking for the Rθ(JB) Junction-To-Board thermal resistance. The parameters will be used for power dissipation calculation. Or should he use ΨJB characterization parameter for his calculation? Either way, we would appreciate it if we could have both.

Thanks in advance!

Art

over 5 years ago

0 JohnTucker over 5 years ago

TI__Guru**** 191445 points

Art,

Yes the maximum junction temperature is 125 C. This is an older device that does not list the updated thermal parameters. I can request them, but it may take 2-3 weeks.

0 Art Mecina over 5 years ago in reply to JohnTucker

TI__Genius 16585 points

Hi John,

Thanks for the swift response.
I'll confirm with the customer his requirements. He mentioned that he will need either for the power dissipation calculation but I think he will need both. Still it's the customer who has the last say if he's willing to wait. I'll let you know as soon as i got a response.

Again thanks for the support!

Best regards,

Art

0 JohnTucker over 5 years ago in reply to Art Mecina

TI__Guru**** 191445 points

Art,

I will close this thread for now. You may re-open it at any time.

Power management

Power management forum

TPS54386-Q1: Absolute Maximum Junction Temp and Theta-JB