LM350A: probability distribution/standard deviation

MUHAMMAD SABIR

Part Number: LM350A

can you please help us obtain the probability distribution/standard deviation info from TI on the variation in the reference voltage for LM350A.

over 5 years ago

0 Jason Song over 5 years ago

TI__Mastermind 23361 points

Hi Muhammad,

May I ask why you would be interested in the distribution for the reference voltage?

Regards,

Jason

0 MUHAMMAD SABIR over 5 years ago in reply to Jason Song

Prodigy 40 points

Looking to run a Monte Carlo analysis on a design.

Regards,

Muhammad

0 Jason Song over 5 years ago in reply to MUHAMMAD SABIR

TI__Mastermind 23361 points

Hi Muhammad,

Sorry for the delay, I will get back to you by 9/20/2019.

Regards,
Jason

0 Jason Song over 5 years ago in reply to Jason Song

TI__Mastermind 23361 points

Hi Muhammad,

We are not allowed to share the actual distribution data. But for Monte Carlo analysis, I would use an estimated mean value of 1.25 and a sigma value of 10mV on this parameter for your analysis. Again, the values provided here are not from the real data and they are only for analysis purpose. Hope it helps.

Regards,
Jason Song

0 MUHAMMAD SABIR over 5 years ago in reply to Jason Song

Prodigy 40 points

Jason,

shall we assume the distribution is Gaussian(Normal)?

0 Jason Song over 5 years ago in reply to MUHAMMAD SABIR

TI__Mastermind 23361 points

Yes, you can assume the distribution of Gaussian.

Power management

Power management forum

LM350A: probability distribution/standard deviation