TPS2HB08-Q1: The High Side Switchs VS Pd Watt Relation

Jack Zheng1

Part Number: TPS2HB08-Q1
Other Parts Discussed in Thread: TPS2H160-Q1, TPS2HB16-Q1, TPS4H160-Q1

When Din VS the Competitor,The current high side switchs datasheet only offer current range , However, the competitor always offer the power But no Pd suggestion, Then will perplex choice.

To evalucate the power to match system, is a complex problem to customer ,

Could you please help give a Pd suggestion Vs Power(?w) range in 12V BCM system about TPS2H160-Q1,TPS2HB08-Q1, TPS2HB16-Q1,TPS4H160-Q1.

over 5 years ago

0 Cameron Phillips over 5 years ago

TI__Genius 12410 points

Hello,

I do not understand what you are asking for.

If you would like you can email me at c-phillips@ti.com to ask the question more thoroughly.

0 Jack Zheng1 over 5 years ago in reply to Cameron Phillips

Prodigy 90 points

Hello

The TI device only give a big current limit range,No normal curent or continues current parameters ,Could you please help give some suggestion to choose the High side switch( like the competitor's device), such as Normal Current/Continuous current,Application how many Watt in 12V BCM system Exa,TPS2HB08-Q1,TPS2HB16-Q1,TPS2H160-Q1,TPS4H160-Q1 or more Thank you!

0 Cameron Phillips over 5 years ago in reply to Jack Zheng1

TI__Genius 12410 points

Helloi,

IN all of the datasheets we give a nominal current for the device and the Rja that you will be ableto calculate what the maximum power dissipation before thermal shutdown will occur

Power management

Power management forum

TPS2HB08-Q1: The High Side Switchs VS Pd Watt Relation