• State Resolved
  • Locked Locked
  • Replies 3 replies
  • Subscribers 64 subscribers
  • Views 858 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

LM5163-Q1: TINA model

Bart
Expert 6460 points
Part Number: LM5163-Q1
Other Parts Discussed in Thread: LM5163

Team,

do we have TINA model for LM5163-Q1? 

The SPICE one which is available shows strange behavior in simulation (in LTspice). It looks like the device was in BOOST current mode without slope compensation. It's switching in ON TIME – max ON TIME cycles.

TINA model could perhaps help to properly simulate it.

  • 0
    TI__Expert 4555 points

    Hi Bart,

    We don't have TINA model for this. But I can loop in modelling team to get verifiy present Pspice model.

    Can you please let me know, what is your application? And can you please give me more detail about the issue you are seeing in the model.

    Best Regards,

    Ankit Gupta

    Application Engineer

  • 0 in reply to Ankit Gupta95
    TI__Expert 6460 points

    Hi Ankit,

    I can't disclose details about application in public forum. 

    Which more details about the issue are needed?

    Kind regards

  • 0 in reply to Bart
    TI__Guru 74462 points

    Hi Bart,

    I recommend using the LM5163 quickstart calculator (downloadable from the product folder) to select the appropriate ripple-generating components for correct ripple voltage waveform at the FB pin. The waveform you showed above indicates instability due to insufficient ripple. See app note snva874 for more detail.

    Regards,

    Tim