Hi,
If not use ULVO of TPS54719, Should I float or pull up-down EN(15 pin) ? if need to pull up or down, what's value of the resistor
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi,
As mentioned in the pin configuration and functions topic 5 of the datasheet, if you don't want the adjustable under-voltage lockout feature then you can leave the EN pin floating.
Thank you very much for reaching out to us!
Best Regards,
Dorian
Hi,
I haven't heard back from you.
Do you have any other queries on this device?
Thank you very much!
Best regards,
Dorian