• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 63 subscribers
  • Views 374 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Original question:

TPS54360B-Q1: EMC Compliance / Input Protection

TPS54360B-Q1: Protection circuitry against surge and burst

Franz Schellhase
Expert 3605 points
Part Number: TPS54360B-Q1

Hi,

My customer wants to get E1 certification (EMC compliance) for TPS54360 like mentioned in this post before: https://e2e.ti.com/support/power-management/f/196/t/834180.

They don't have a specific problem but would like some guidance on protection circuitry against surge and burst, which is not a topic in the Layout Best Practices.

Can you give guidance on that?

Thank you,

Franz

  • 0
    TI__Mastermind 25590 points

    Franz,

    We do not have a specific document for buck EMS but we have an app note TIDUAS1 which details IEC ESD, EFT, and Surge for RS-485 Bus Protection. This is not exactly what you're looking for but it has lots of good information about what each test is and how to protect against it.

    In short, the TPS54360B-Q1 has ESD diodes built-in which are detailed in the datasheet. For surge protection you can add a TVS diode, series pulse proof resistor, MOV, and TBU as detailed in TIDUAS1.

    -Sam