My question is when I connect the INT pin to a logic rail,the charge process stop.
If keep the INT pin alone,everything‘s OK. It can charge in the default mode with a 2A charging current and I2C communication is OK also.
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
My question is when I connect the INT pin to a logic rail,the charge process stop.
If keep the INT pin alone,everything‘s OK. It can charge in the default mode with a 2A charging current and I2C communication is OK also.