LP5018: Schematic check

Ishwarya P

Part Number: LP5018

This is the LED board schematics and the main board is there separately,Both are connected via the B2C connector.Let me know any changes is required in this schematics...

over 5 years ago

0 Charles-Chen over 5 years ago

TI__Genius 11836 points

Hi Ishwarya,

What is the component and it's value between VCC and R5 and R6? The figure is a little bit fuzzy. Don't forget to connect thermal pad to GND.

0 Hardy Wu over 5 years ago

TI__Genius 12915 points

Hi Ishwarya,

The schematic looks OK. Just make sure place capacitors close to the device when drawing layout.

Power management

Power management forum

LP5018: Schematic check