BQ20Z70-V160: the chemID in the GPC-report is not list in bqevsw

user5792731

Prodigy 60 points

Part Number: BQ20Z70-V160
Other Parts Discussed in Thread: BQEVSW

I log the file and sent to the gpc，but the chemID in the GPC-report is not list in bqevsw. What need I do next?

Is it necessary to use a chemID?

Because of my cells are Licoo2, 18650, can I just use the default?

thanks

over 6 years ago

0 Onyx Ahiakwo over 6 years ago

TI__Guru* 76230 points

Hi,

You can use another id that is listed as a close match and exists in the data base.

Also, did you update bqEVSW with the latest updater to ensure all the ids are there?

thanks

Onyx

0 user5792731 over 6 years ago in reply to Onyx Ahiakwo

Prodigy 60 points

hi Onyx ,

thanks for your help.

another question:

The update status didn't change from 05 to 06 after my second discharging, then i began another learning cycle and after charging to full and rest for 2 hours i found the update status changed to 06. is it normal?

thanks

0 Onyx Ahiakwo over 6 years ago in reply to user5792731

TI__Guru* 76230 points

Yes, that happens sometimes which i think is more of an issue with the software tool that with your cycle. can you verify that your qmax and Ra values changed? If they did, then yes yoour learning was successful.

thanks

Onyx

Power management

Power management forum

BQ20Z70-V160: the chemID in the GPC-report is not list in bqevsw