BQ20Z75-V160: Looking for config files for BQ20Z75

Chris Webb1

Part Number: BQ20Z75-V160
Other Parts Discussed in Thread: BQSTUDIO, BQEVSW

Thanks for your previous support in configuring BQSTUDIO with 20z70v160

My products also use a battery gas gauge BQ20Z75DBTR-V160, is it possible to connect using the same bqEVSW? if so, how can I find the config files to allow BQ Studio to read this pack please?

I am running bqEVSW v0.9.65

over 5 years ago

0 Andy Liu (BMS) over 5 years ago

TI__Guru 52115 points

Hello Chris,

This is a legacy device. We do not have bqStudio support, but it should have bqEVSW support.

Refer to the app note below.

http://www.ti.com/cn/lit/ug/sluu277a/sluu277a.pdf

Andy

0 Chris Webb1 over 5 years ago in reply to Andy Liu (BMS)

Prodigy 40 points

Thanks Andy,

The app note is directing me to the relevant product information for the bq20z75, however the only download for this is the chemistry updater SLU122

How does this install in the bqEVSW environment please?

Is there a specific installer for the bq20z75 config files?

KR,

Chris.

0 Andy Liu (BMS) over 5 years ago in reply to Chris Webb1

TI__Guru 52115 points

Allow me double check and get back to you.

Power management

Power management forum

BQ20Z75-V160: Looking for config files for BQ20Z75