What is the typical control loop bandwidth of this device?
Thanks,
Narek
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi Narek,
Based on the loop response measurement, the bandwidth is ~200kHz. See below figure below.
You can also check for the User's Guide for details (http://www.ti.com/lit/ug/slvuai5/slvuai5.pdf).
Best regards,
Excel
Hi Narek,
If you don't have any further queries, then I will close this thread. You can re-open it anytime by posting your question.
Best regards,
Excel