TPS57160-Q1: TINA-TI simulation - not getting the output

Srinivasu V

Part Number: TPS57160-Q1

Hello Team,

I am trying to simulate TPS57160-Q1 Buck convertor. I am not getting output and even at Voltage divider junction also i am not finding expected voltage. Kindly check the attached design and provide the solution.

TPS57160 simulation.TSC

over 5 years ago

0 Frank De Stasi over 5 years ago

TI__Guru 72465 points

I have passed this to our modeling team.

When they respond I will get back to you.

0 Frank De Stasi over 5 years ago in reply to Frank De Stasi

TI__Guru 72465 points

We have tested the model and it seems to be OK.

Can you go to the product page and then go to Webench and run a simulation. Then click on "export" TINA model. And try to run that.

0 Frank De Stasi over 5 years ago in reply to Frank De Stasi

TI__Guru 72465 points

I am closing this post due to inactivity.

Power management

Power management forum

TPS57160-Q1: TINA-TI simulation - not getting the output