Other Parts Discussed in Thread: UCC27524
Hi,
I suspect typo of the datasheet.
Could you check if following unit is correct?
Best Regards,
Kuramochi
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hello Tadahiko-san,
Thanks for bringing this to our attention.
You're correct these are typos and should instead read "mA" except for "A, B Input leakage current high" which should instead read "200uA".
This device is one of our older, least optimized driver, I suggest you consider promoting UCC27524, part of our latest most optimized gate drivers more suitable for modern designs.
Please let us know if you have additional questions.
Regards,
-Mamadou
Mamadou-san,
Thank you for your reply.
>You're correct these are typos and should instead read "mA" except for "A, B Input leakage current high" which should instead read "200uA".
Is it correct?
I think that we should instead read "uA" except for "A, B Input leakage current high" which should instead read "200nA".
Please check it .
Best Regards,
Kkuramochi
Hello Tadahiko-san,
I've ordered samples, should expect to receive them within a day or 2.
Meanwhile, I will send you a friend request where we can continue following up on progress of testing soon as I begin.
Please let let us know if you additional questions.
Thanks.
Regards,
-Mamadou