BQ51003: compatible chargers

ajayt

Part Number: BQ51003

We intend to use BQ5103 as wireless power receiver together with Ti charger and are looking for better understanding of following issues:

Are there any known incompatibilities known by Ti with special 3rd party Qi chargers - so we shall add info in our reference list to avoid those?
We appreciate knowledge about Qi wireless power test labs (preference Germany) we can check our wireless power receiver solution against.
Does Ti know about good reference product we could use in first place as recommendation for the Qi charger our customers shall buy?

We want to avoid any incompatibilities during ramp-up of our product as much as possible

over 5 years ago

0 Bill Johns over 5 years ago

TI__Guru* 75656 points

Hello

1.) --- Look for the Qi logo on product this is the most reliable. Many devices will say Qi compatible but do not show logo, avoid them.

2.) -- Check the WPC web site for latest list of test labs.

3.) --- A good reference TX to start with is the TYLT Vu or TYLT Vu Solo, available on Amazon the design is TI based, if you have debug problems I know where to start with those units.

0 Raheem over 5 years ago in reply to Bill Johns

TI__Mastermind 21590 points

Hello,

Any updates here?

0 Bill Johns over 5 years ago in reply to Raheem

TI__Guru* 75656 points

Hello

I will close the post for now, if you need further assistance contact me by email.

Power management

Power management forum

BQ51003: compatible chargers