• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 63 subscribers
  • Views 417 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TPS7A19: Reverse current protection

Michiaki Tanii
Expert 4880 points

Part Number: TPS7A19

Hi

 

Let me check the below

 

-        Does TPS7A1901 have reverse current protection ?
If no, should customer install protection diode if they need ?

 

-        Can PG pin leave open if the pin is unused ?

 

Thank you and best regards,

Michiaki

  • 0
    TI__Mastermind 23361 points

    Hi Michiaki, 

    TPS7A1901 does not have built-in reverse current protection and the protection needs to be implemented by having an external diode as needed. For LDOs with reverse current protection, the datasheet normally will have this listed on the first page. The PG can be left open or grounded if not in use. 

    Regards, 
    Jason Song