• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 63 subscribers
  • Views 204 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TL431: internal op-amp

Youngdon Jung
Prodigy 10 points
Part Number: TL431

Hello.

Can you provide input offset voltage, input offset current and input bias current of the op-amp inside TL431?

I need nominal value and deviation value under initial telerance and high/low temperature for worst case analysis.

waiting for your reply.

Thank you.

  • 0
    TI__Genius 11401 points

    Hi Youngdon 

    Input offset voltage is included in the initial accuracy spec (1% for A Grade and 0.5% for B grade, 2% standard grade). 

    Input bias current and input offset current are included in the IREF spec.  You can account these in your budget. 

    Regards

    Trailokya