• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 63 subscribers
  • Views 327 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

UCC21520: About OUTA and OUTB

Tsukui Yusuke
Guru 21930 points
Part Number: UCC21520
Other Parts Discussed in Thread: UCC21540

Hi,

Customer is looking for devices that can turn on OUTA and OUTB at the same time.
Can UCC21520 output OUTA and OUTB simultaneously?

I think it is impossible because of the dead time and protection available.
However, I want some advice just in case.

Regards,
Yusuke

  • 0
    TI__Guru**** 189401 points

    Hi, Yusuke-san,

    Yes, this is allowed. You  can enable this by tying DT to VCCI which allows the outputs to overlap.

    I recommend you also promote the UCC21540 to your customer. It is one of our newer isolated half-bridge drivers which  is optimized for digital controllers and Si MOSFET applications.

    If this answered your question, please press the green button.

    Let us know if you have further questions.