• State TI Thinks Resolved
  • Locked Locked
  • Replies 3 replies
  • Answers 2 answers
  • Subscribers 64 subscribers
  • Views 451 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

BQ20Z95: BQ Management Studio - Calibrate Function

Andreas Adler
Prodigy 20 points

Part Number: BQ20Z95

Dear Fellows

We use BQ Management Studio v1.50 for "Pack Current Calibration" in our lab for BQ20z95. We want to be able to do that over I2C using a custom Linux board. Here's my question: When we click "Calibrate Part as indicated below" button, with only "Pack Current Calibration" option checked, and a (negative) current value entered in the "Enter actual current" field, what I2C transactions follow? In other words, I want to know the BQ20z95's registers affected by this action, and how the negative current value is interpreted into a value that is written to those registers.

Thanks for your help in advance.

Regards,

Andreas.