Other Parts Discussed in Thread: BQSTUDIO,
While writing the df.fs file, a phenomenon was observed where the data values to be compared differ in the following places.
W: AA 00 00 0F
X: 1000
W: 16 00 03 00 00
W: 16 64 03 00
X: 20
C: 16 66 00
W: 16 00 02 00 00 00 EA FF 33 B1 FA 33 6C FB 33 95 FE 33 AD FE 33 FF FF 3F 00 01 00 FF FF 3F FF FF 3F FF FF 3F FF FF 3F FF FF 3F FF FF 3F FF FF 3F FF FF 3F FF FF 3F 16 00 3F 58 CB 33 C3 00 08 11 00 00 00 00 00 FF AA 0E FB A7 0E FF A6 0E FF A1 0E FF A0 0E FE A3 0E 61 A2 0E DE FF 3A 65 FF 3A E2 FF 33 FF AF 0E
W: 16 64 DE 34
X: 2
C: 16 66 00
W: 16 00 02 01 00 00 01 4F 03 3F 11 0C D9 FF 30 E0 FF 35 2F 10 0C E0 FF 35 FF FF 23 FF DF 0B D8 FF 33 E3 AF 04 E2 BF 04 CF FF 36 E2 A0 04 E3 A1 04 00 C7 02 01 C6 02 E5 AF 04 E3 BF 01 E4 AF 04 E2 BF 01 FF AC 0E E1 1C 04 88 FF 31 E2 A0 04 E3 A1 04 02 AB 18 7F 2B 0E FF 1B 0E BD FF 32 FC FA 0E FB AF 0C 02 2B 18
W: 16 64 A6 2D
X: 2
C: 16 66 00
W: 16 00 05
W: 16 64 05 00
X: 170
C: 16 66 00
C: 16 04 B6 45 2A D4
============
When customer read 4-byte
85 BA F8 CB
If this value is different, what is the cause?
No error has been seen up to this point.
Kagawa
