BQ24105-Q1: Behavior after completion of charging with safety timer

Koji Hayashi92

Mastermind 7030 points

Part Number: BQ24105-Q1

Hi TI-team

Please tell me the behavior after charging with Safety timer is completed.

For example, after the safety timer ends, the charging ends, and when the battery voltage drops,

the process automatically shifts to the recharging sequence, and the safety timer charging starts.
Is this correct ?

Best Regards,

Koji Hayashi

over 5 years ago

0 Jeff F over 5 years ago

TI__Guru**** 167216 points

Hi Koji,

Datasheet section 8.3.11 explains timer fault recovery. Condition 1 explains that the if the battery voltage is above the recharge and then falls below the recharge threshold, the timer is reset.

Regards,

Jeff

0 Koji Hayashi92 over 5 years ago in reply to Jeff F

Mastermind 7030 points

Hi Jeff-san

Thank you for response.

I understand.

Best Regards,

Koji Hayashi

Power management

Power management forum

BQ24105-Q1: Behavior after completion of charging with safety timer