LM5116: how to simulate BODE data in the Tina-TI

user6116926

Part Number: LM5116

Hi TI,

I have used the LM5116 in the current project. I plan to use TinaTI to simulate the gain curve and phase residue of the schematic diagram. The schematic diagram I simulated is the LM5116_TRANS schematic diagram in the directory Example/SMPS, but this circuit cannot simulate AC data, so please help to guide how to simulate the BODE figure data of LM5116 in TinaTI, thank you!

over 5 years ago

0 Samuel Jaffe over 5 years ago

TI__Mastermind 25590 points

User,

You can use WEBENCH to simulate the bode plot. Go to the LM5116 product page and enter your specs in the WEBENCH box on the right. Click "Open Design." From there you can modify components and simulate to get your bode plot.

We also have an unencrypted PSPICE average model on the product page under Design & development - Models. You can import that file into TinaTI and run your bode plot that way. But WEBENCH is probably quicker.

-Sam

0 user6116926 over 5 years ago in reply to Samuel Jaffe

Prodigy 100 points

thanks Sam

Power management

Power management forum

LM5116: how to simulate BODE data in the Tina-TI