Hi team,
how long does it take from /RESET rising edge to where the WDI edge can be treated valid? i.e., the "blank out" period.
Please refer to below image -
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi team,
how long does it take from /RESET rising edge to where the WDI edge can be treated valid? i.e., the "blank out" period.
Please refer to below image -
PengYu,
There is no blank out period. As soon as /RESET deactivates to logic high, the watchdog is reinitialized. Please be sure to maintain a WDI pulse width of at least 100ns if pulsing WDI right after /RESET comes up. This will ensure the WDI signal is detected.