This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

WEBENCH® Tools/TPS54618-Q1: Phase Margin

Part Number: TPS54618-Q1

Tool/software: WEBENCH® Design Tools

Dear Team,

My customer will have 600uF*2 at the output.

So I would like to use Webench to find the suitable compensation value.

But the webench only mention the phase margin is not enough, it didn't change the compensation network.

Can you help me to check the compensation network for 600uF*2?

https://webench.ti.com/appinfo/webench/scripts/SDP.cgi?ID=A043CC4A1BE26C8A

BR

Kevin