BQ40Z50EVM-561: bq40z50

Tufan KARDAS

Part Number: BQ40Z50EVM-561
Other Parts Discussed in Thread: BQ40Z50, BQSTUDIO

We are trying to use the BQ40Z50EVM but it is not appear in the BQStudio. ı connected to pc with EV2300 but BQ40z50 EVM module don't appeared in my pc.what is the reason of this?

over 5 years ago

0 Andy Liu (BMS) over 5 years ago

TI__Guru 52115 points

You need to follow the instructions in the EVM user's guide to have all the necessary connections done. In addition, I would suggest you connect the SYS PRES position on the J3 terminal block to PACK– and push the Wake button a few times before you launch the bqStudio.

Andy

0 Tufan KARDAS over 5 years ago in reply to Andy Liu (BMS)

Prodigy 80 points

ı didn't connect to SYS PRES position. ı just did connect with EVM module and between EV2300. So,bq40z50 EVM module should online to bqStudio. ı can see connected to EV2300 but ı can't see bq40z50 EVM module.

0 Andy Liu (BMS) over 5 years ago in reply to Tufan KARDAS

TI__Guru 52115 points

I would suggest you connect the SYS PRES position on the J3 terminal block to PACK– and push the Wake button a few times before you launch the bqStudio.

Andy

0 Tufan KARDAS over 5 years ago in reply to Andy Liu (BMS)

Prodigy 80 points

Thank you for answer. I will try connection

Power management

Power management forum

BQ40Z50EVM-561: bq40z50