TPS1HA08-Q1: Internal MOSFET Drain to Source Capacitance

Keith Keller

Expert 7230 points

Part Number: TPS1HA08-Q1

Hello,

We are considering using the TPS1HA08-Q1 in a new design.

Would you be able to tell us what the drain to source capacitance is of the internal MOSFET?

Thank you, Keith

over 5 years ago

0 Timothy Logan over 5 years ago

TI__Mastermind 34905 points

Hello Keith,

We do not specify/provide this information as it is not normally needed for design considerations of the application. Could you let me know a little bit more of why you need this information? What problem/requirement is driving this?

0 Keith Keller over 5 years ago in reply to Timothy Logan

TI__Expert 7230 points

Hello,

This device will be the output to a test and measurement system. In a high impedance state we don't want too much capacitive loading.

Thank you, Keith

0 Cameron Phillips over 5 years ago in reply to Keith Keller

TI__Genius 12410 points

Keith,

We do not give out this information for the device but I do not believe that it would be useful.

Can you explain the load a little more? Is it capacitive, inductive or resistive in nature?

Power management

Power management forum

TPS1HA08-Q1: Internal MOSFET Drain to Source Capacitance