TPS62827: Device top marking and pin 1 indicator position

Yen Ting Chu

Intellectual 1350 points

Part Number: TPS62827

Team,

Would you please provide the device top marking corresponding to the pin 1 indicator for TPS62827DMQR?

Thanks,

Best regards,

Andy Chu

over 4 years ago

0 Dorian Brillet de Cande over 4 years ago

TI__Genius 14876 points

Hello Andy,

As you can see in datasheet p.26 (Package Outline section), pin 1 is identified with a white dot in of corner.

If you look at the EVM webpage, you can see in the EVM picture the white dot to indicate where pin 1 is.

Thank you very much!

Regards,

Dorian

0 Yen Ting Chu over 4 years ago in reply to Dorian Brillet de Cande

TI__Intellectual 1350 points

Dorian,

I would like to know the pin1 indicator corresponding to top marking position. You can refer to my previous E2E post. It has the example top marking with pin 1 indicator info that I am looking for. Thank you.

https://e2e.ti.com/support/amplifiers/f/14/t/796092

Best regards,

Andy Chu

0 Dorian Brillet de Cande over 4 years ago in reply to Yen Ting Chu

TI__Genius 14876 points

Hi Andy,

As previously mentioned, pin 1 indicator is a white dot at the one of the top corner of the device, see below:

Thank you very much!

Regards,

Dorian

0 Dorian Brillet de Cande over 4 years ago in reply to Dorian Brillet de Cande

TI__Genius 14876 points

Hello Andy,

I haven't heard back from you.
Do you have any further question on that topic?

Thanks a lot!

Regards,
Dorian

Power management

Power management forum

TPS62827: Device top marking and pin 1 indicator position