UCC28070EVM: ucc28070 PCB file

Sammi Shang

Part Number: UCC28070EVM

Dear team,

Customer want to know how to use the Gerbers file in this link. They use Altium designer, but seems the gerbers file could not import successfully to the software.

http://www.ti.com.cn/tool/cn/UCC28070EVM?keyMatch=UCC28070&tisearch=Search-CN-everything&usecase=part-number

Or could you provide any PCB file that could used in Altium designer?

Thanks.

Best regards,

Sammi

over 4 years ago

0 David Huang33 over 4 years ago

TI__Genius 9140 points

Hi Sammi,

for Altium Designer, you can set up a CAM file, then import the Gerber file that TI offer.

Below is a link to show you how to do it.

another method to open Gerber, you can use GerberView software, the software is free. You can download from Internet.

Hope this helps you.

0 dushimutong over 4 years ago in reply to David Huang33

Intellectual 620 points

你好：

UCC28070EVM的Gerbers解压后的文件

格式不对啊，软件识别不了。

0 dushimutong over 4 years ago

Intellectual 620 points

Hell：

这个UCC28070EVM的Gerbers文件里面缺少Net网络表文件。不知道你能否帮我找找。

Thanks.

Best regards,

Neil

0 Sammi Shang over 4 years ago in reply to David Huang33

TI__Expert 4450 points

Hi David,

Per customer mentioned in the post, no right format file in this zip folder that could import into AD.

Thanks.

Best regards,

Sammi

0 David Huang33 over 4 years ago in reply to Sammi Shang

TI__Genius 9140 points

Hi sammi,dushimutong,

all the Gerber document already inclued in the files you list.*.M1/M2 are nets layer.

I also try using altium designer to open the Gerber.It is easy by following the steps I listed in the preview post.

Below is the link to show you how to do it.

I also attach the document I try step by step.You can follow it.how to open Gerber.docx

Gerber文件怎么打开-百度经验

jingyan.baidu.com

Gerber文件怎么打开,Gerer文件是给PCB加工厂商的加工文件，我们应该怎么打开呢，下面分享一下打开方法，供大家参考！

0 dushimutong over 4 years ago in reply to David Huang33

Intellectual 620 points

Hell David：

谢谢你的提示，我这个UCC28070EVM的Gerbers文件里面缺少Net网络表文件。不知道你能否帮我找找,不然没法导出PCB。

Thanks.

Best regards,

Neil

0 dushimutong over 4 years ago in reply to David Huang33

Intellectual 620 points

Hell David：

谢谢，我根据你提供的资料找到了，谢谢。

0 David Huang33 over 4 years ago in reply to dushimutong

TI__Genius 9140 points

OK, allow me to close the post.

thanks.

0 dushimutong over 4 years ago in reply to David Huang33

Intellectual 620 points

Hell David :

Ok,Thanks.

Best regards,

dushimutong

Because of the Thanksgiving holiday in the U.S., TI E2E™ design support forum responses may be delayed from November 25 through December 2. Thank you for your patience.

Power management

Power management forum

UCC28070EVM: ucc28070 PCB file

Gerber文件怎么打开-百度经验