Trouble with BQ20Z75-V180

Wojciech Rokacz

Other Parts Discussed in Thread: BQ20Z75-V180, BQ20Z75-V160

Hi. I have problem with BQ20Z75-V180. Before I use the newest version of IC BQ20Z75-V180 I use version BQ20Z75-V160.


1. Software BQEV 0.9.59 does not recognize version IC V180.
2. In software BQEV 0.9.59 I could not find .encr file for this device  V180.
3.The Golden File form V160 does not work properly with V180, even if TI suggest it.

I'm looking forward to hear from you.

Wojtek

over 14 years ago

0 Doug Williams4811 over 14 years ago

TI__Expert 6470 points

Wojciech,

The attached installer, v0.9.65 should have all the correct files.

Regards,

Doug

bqEVSWSetup00.09.65_bq20z75v1.82.exe

0 Doug Williams4811 over 14 years ago

TI__Expert 6470 points

Wojciech,

The attached v0.9.65 installer should have all the required files. I already tried to attach it as an exe, but it was rejected. So, the attached file has its extension changed from exe to txt. Just change it back and run it.

Regards,

Doug

0 Wojciech Rokacz over 14 years ago in reply to Doug Williams4811

Prodigy 90 points

Hi,

Thank a lot for your help.

New software properly identified device.

I try to make new Golden File and test battery pack.

Best Regards

Wojtek

Power management

Power management forum

Trouble with BQ20Z75-V180