This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

SMPS reference Design

Other Parts Discussed in Thread: UCC28056, UCC256304, UCC28730, PMP11303, UCC29950, PMP9640, UCC28051, UCC25600

Hello Everyone, 

I would like to design SMPS for industrial application. Spec AC 230 to 260V, DC 24V /12A. Please share reference design with technical documents.

Regards,

Ram

  • Hello Ram,

    Please see TI Home > TI reference designs search
    This is where ALL of TI reference designs are located.

    In the search PARAMETER window enter; Vin min 230V, Vin max 260V, Select AC input, Vout 24V, Iout 12A, 
    http://www.ti.com/reference-designs/index.html#search?vinmin=230&vinmax=260&iout=12&vout=24&intype=AC

    8 designs meet the criteria.

    PMP22087

    This reference design is an AC/DC power supply design with critical conduction mode (CRM) PFC and half-bridge LLC series resonant converter that provides 24 V, 240-W continuous, 336-W peak output from a universal input AC voltage (90 VAC to 264 VAC). This design uses UCC28056 CRM/DCM PFC controller (...)View design

    PMP22088

    This reference design is a control card for an LLC converter and integrates all of the essential functions for controlling an LLC converter, including the HV start-up, X-capacitor discharge and the drivers for the power FETs. By employing the advanced burst mode, it can also help the LLC (...)View design

    PMP21160

    This reference design uses UCC28056 CRM/DCM PFC controller and UCC256304 enhanced LLC controller with integrated driver to provide 24-V/10-A output (continuous, 14-A peak) from universal AC input. This design achieves 92.8% peak efficiency at 115-Vac input and 94.9% peak efficiency at 230-Vac input (...)View design

    PMP40281

    This reference design is a a control card for LLC converter. It integrates all of the essential functions for controlling a LLC converter including the HV start-up, X-capacitor discharge and the drivers for the power FETs. By employing the advanced burst mode, it can also help the LLC converter to (...)View design

    PMP11303

    PMP11303 is high-efficiency AC/DC power supply reference design with universal AC input and 25V/13.5A and 12V/1A outputs. LLC+PFC combo IC UCC29950 is applied for the main power stages with 25V/13.5A output while UCC28730 is applied for the auxiliary power with 12V/1A output. This design has low no (...)

    PMP9640

    High efficiency, high power factor and reliable power supply are the main focus of the PMP9640 design for motor driver applications.  Low cost analog transition mode (TM) PFC controller UCC28051 has been used for bridgeless PFC as the first conversion stage of the PMP9640.  LLC series (...)

    View design

    PMP9531

    High efficiency, high power factor and reliable power supply are the main focus of the PMP9531 design for motor driver applications.  Transition mode (TM) power factor correction (PFC) with UCC28051 and LLC series resonant converter (SRC) with UCC25600 are applied in PMP9531.  In addition (...)

    View design

    PMP5141

    The PMP5141 reference design provides a 24V/10A output with power factor correction from a universal AC input voltage range. This design uses the UCC28051 to control the front end PFC boost stage. The output of the PFC is followed by a UCC25600 LLC resonant half-bridge. The total efficieny, from (...)View design

    These reference designs will help your search.

  • Hai Ed Walker,                                                                                                                                                                                Thank you for your reply.

     Regards,

    Ram