Asking for the design to replace MIC33153

SHH

Other Parts Discussed in Thread: TPS8268180, TPS82084, TPSM82821

Hi Team,

Customer is designing MIC33153.
Would you please provide suggestions to replace MIC33153?

http://ww1.microchip.com/downloads/en/DeviceDoc/MIC33153-4MHz-Internal-Inductor-PWM-Buck-Regulator-with-HyperLight-Load-20006223A.pdf

BR,
SHH

over 5 years ago

0 Chris Glaser over 5 years ago

TI__Guru**** 150900 points

Hi SHH,

You are welcome to request a cross here, and we also have a cross reference tool here: https://bomcross.ti.com/en/search?searchTerm=mic33153

For any cross request, it is best if we know the application, Vin range, Vout, and output current needed. We also need to know about any required features.

For a basic functional cross, I would recommend TPSM82821/2 or TPS82084. The TPS8268180 family can provide a much smaller, more integrated solution.

0 SHH over 5 years ago in reply to Chris Glaser

TI__Mastermind 32196 points

Hi Chris,

Thanks for feedback. customer need an comparison table for MIC33153.

Can you please help for the comparison table?

BR,

SHH

0 Chris Glaser over 5 years ago in reply to SHH

TI__Guru**** 150900 points

Hi SHH,

Let me tailor a comparison for your specific needs. We can discuss them over email.

All the devices I mentioned are smaller than the Micrel device. The TPS826xx family is also much more integrated and requires no external components--it is the simplest and easiest to use module.

Power management

Power management forum

Asking for the design to replace MIC33153