Power management

Power management forum

State Resolved
Locked Locked
Replies 4 replies
Answers 1 answer
Subscribers 63 subscribers
Views 256 views
Users 0 members are here

Support feedback

Options

Options

Related

WEBENCH® Tools/LM3880: LM3880 simulation

Zoubida AZAIZIA

Prodigy 150 points

Part Number: LM3880

Tool/software: WEBENCH® Design Tools

Hi,

When i simulate LM3880 trans with Orcad, any simulation appears cause of this error :
ERROR -- Subcircuit LM3880_TRANS used by X_U1 is undefined
Unfortunately, i didn't understand this error, can you tell me what should I change in my schema to get my plots please ?

Regards.

over 5 years ago

0 yihe over 5 years ago

TI__Guru 65750 points

Hello

I had forwarded this to the WEBENCH team and they will assist you on this.

Regards

Yihe

0 yihe over 5 years ago in reply to yihe

TI__Guru 65750 points

Hello

Do you make any modification on the zip file download from TI.com? Do you directly open the .opj file to run the simulation?

we had tried the cadence tool 17.2 without any issue.

Could you share the tool name and version number used?

Regards

Yihe

0 yihe over 5 years ago in reply to yihe

TI__Guru 65750 points

Hello

We haven't heard from you for a while and assumed that this issue has been solved. Please post if you need any further help.

Regards

Yihe

0 Zoubida AZAIZIA over 5 years ago in reply to yihe

Prodigy 150 points

Hello,

I apologize for not letting you know that the sequencer was well simulated, apparently the problem was the version of the windows.

Thank you Yihe

Regards