WEBENCH® Tools/LM5155: WEBENCH Eagle Export Issue

Nick Ashworth

Part Number: LM5155

Tool/software: WEBENCH® Design Tools

I get the following error when I try to open the exported Eagle schematic from WEBENCH...

Error:

line 1, column 35271: redefinition of name 'VDC' in tag <attribute>

0 Garrett Roecker over 5 years ago

Hi Nick,

Thanks for reaching out with your question and for using the LM5155.

I have contacted the engineer that is responsible. They should respond shortly.

Thanks,

Garrett

0 Atul_Kulkarni over 5 years ago in reply to Garrett Roecker

Genius 4910 points

Hi Nick,

The issue is being observed due to custom BOM components present in the schematic.(Ccomp,Ccomp2 and Rcs).

Select real components either from the alternate part list or by varying the limits and then selecting the part and export it.

This will resolve your issue.Let me know if you still face the issue,

Thanks and Regards,

Atul

Power management forum