• State Resolved
  • Locked Locked
  • Replies 2 replies
  • Answers 1 answer
  • Subscribers 63 subscribers
  • Views 395 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TPS54316: TPS54316 loop stablity simulation TINA example

Sunny Qin
Expert 4890 points
Part Number: TPS54316

Hi Team,

As TPS54316 do not need external FB resistor, so we don`t know how to simulate   loop stablity in TINA, do you have TPS54316 loop stablity simulation TINA example? Or some guide line?

Thanks very much.

Regards ,Sunny

  • 0
    TI__Mastermind 25430 points

    Hi Sunny,

    In the product page of TPS54316, I could only see Transient models. Bode plot measurements cannot be done on Transient Models. You need to have Average Models for this. Creating average model depends on the business opportunity and will certainly take a longer time.

    Instead, if you could do a transient analysis and derive conclusion, I think would be the easier and faster way in this case.

    Please let me know if you need more information.

    Regards,

    Febin 

  • 0 in reply to Febin
    TI__Expert 4890 points

    Hi Febin,

    Many thanks for your comments.

    Regards, Sunny