BQ25611D: We ran into this problem when using the TINA simulation tool to simulate bq25611d (ERC error specification check, kept warning this error) and could not simulate

2018

Part Number: BQ25611D

We ran into this problem when using the TINA simulation tool to simulate bq25611d (ERC error specification check, kept warning this error) and could not simulate

over 5 years ago

0 Hong Mao over 5 years ago

TI__Expert 5590 points

Hi, may I ask where you got this tool?

0 Hong Mao over 5 years ago in reply to Hong Mao

TI__Expert 5590 points

Hi, the tool is not supported with this device. Thanks.

0 user5274383 over 5 years ago in reply to Hong Mao

Prodigy 10 points

I now need the macro model of BQ25661D

0 Hong Mao over 5 years ago in reply to user5274383

TI__Expert 5590 points

Did you mean BQ25611D? BQ25611D TINA simulation is not supported.

0 Hong Mao over 5 years ago in reply to Hong Mao

TI__Expert 5590 points

BQ25611D SPICE model is not available. Battery chargers are very complicated with many control loops and operating modes. And the charger behaviors also dependent on battery characteristics. It is more efficient to do hardware evaluation. We will provide the technical support for the hardware development if there are questions.

Power management

Power management forum

BQ25611D: We ran into this problem when using the TINA simulation tool to simulate bq25611d (ERC error specification check, kept warning this error) and could not simulate