• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 64 subscribers
  • Views 198 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

BQ28Z610-R1: I2C PullUp , internal pin construction

Andre Stelzer
Prodigy 220 points
Part Number: BQ28Z610-R1

Hello,

a want to use the BQ28Z610-R1. At the moment i have some problems with the I2C pins.

Based on this:

https://e2e.ti.com/support/power-management/f/196/t/625940?tisearch=e2e-sitesearch&keymatch=BQ28Z610%2525252525252520i2c

https://e2e.ti.com/support/power-management/f/196/t/624959?tisearch=e2e-sitesearch&keymatch=BQ28Z610%252525252520i2c

it was said that the mentioned 3,3 kR pulldown resistor is wrong. But the newest datasheet still have the resistor entry:

So the question is: is this still wrong and the I2C pins are simple open-drain pins without any pullup/pulldown resistor?

Best regards

Andre