LM5088MH-1EVAL: Design Files

Art Mecina

Genius 16655 points

Part Number: LM5088MH-1EVAL
Other Parts Discussed in Thread: LM5088

Hello Guys,

Good day!

We have a customer looking for the pcb design files of LM5088MH-1EVAL.

LM5088MH-1EVAL: http://www.ti.com/tool/LM5088MH-1EVAL

The user Guide only contains the image of the layers of the PCB, however customer is looking for the actual design files to download. Is this available?

Thanks in advance!

Art

over 5 years ago

0 Timothy Hegarty over 5 years ago

TI__Guru 73072 points

Hi Art,

We are checking for these files now and will get back to you tomorrow. In the meantime, please see app note snva803 for best practices on power stage layout.

Regards,

Tim

0 Timothy Hegarty over 5 years ago in reply to Timothy Hegarty

TI__Guru 73072 points

LM5088_PCB.zip

Hi Art,

The LM5088 is an old EVM and the source files are not readily available. I may be able to track down the gerbers if that's useful for you. As an alternative, here are files for a PCB using Altium designer - looks somewhat similar to the EVM.

Regards,

Tim

http://www.ti.com/widevin

0 Art Mecina over 5 years ago in reply to Timothy Hegarty

TI__Genius 16655 points

Hello Tim,

Any available information like Gerber files is welcome.

Let me know if its okay to attached it here or you prefer to discuss offline via email. I could send one.

Thanks!

Art

0 Art Mecina over 5 years ago in reply to Art Mecina

TI__Genius 16655 points

Hello Tim,

Any update regarding the Gerber files?

Best regards,

Art

0 Timothy Hegarty over 5 years ago in reply to Art Mecina

TI__Guru 73072 points

Hi Art,

The gerbers should be available early next week. I hope the source files I sent are useful.

Regards,

Tim

0 Art Mecina over 5 years ago in reply to Timothy Hegarty

TI__Genius 16655 points

Hi Tim,

Thank you very much!

I'll wait for the gerbers.

Yes, the PCB using Altium designer you have given were provided as well to our customer.
For sure that would be helpful as well since they are similar to the requested EVM.

Art

0 Art Mecina over 5 years ago in reply to Art Mecina

TI__Genius 16655 points

Hello Tim,

Any update regarding the Gerber files?

Let me know if you prefer to discuss offline, i could send a separate email.

Thanks!

Art

0 Timothy Hegarty over 5 years ago in reply to Art Mecina

TI__Guru 73072 points

Hi Art,

Looks like I haven't got access to the gerbers. Please email me offline to discuss further.

Regards,

Tim

0 Art Mecina over 5 years ago in reply to Timothy Hegarty

TI__Genius 16655 points

Hi Tim,

I will close this ticket now since this will now be discuss offline.

Thanks!

Art

Power management

Power management forum

LM5088MH-1EVAL: Design Files