Fusion Digital Power Designer User's Guide

Osamu

Prodigy 10 points

Is there New User's Guide for New Fusion Digital Power Designer?

I started to use Fusion Digital Power Designer V1.8.6.

This Application includes Use's Guide, But it is old. 2007.

It is very inconvinient because old guide is not suitable for present version.

over 14 years ago

0 Brad over 14 years ago

TI__Genius 13700 points

The updated user guide, "Using the UCD92xx Digital Point-of-Load Controller", is available from the following link:

http://focus.ti.com/analog/docs/litabsmultiplefilelist.tsp?literatureNumber=sluu490&docCategoryId=6&familyId=688

And should also be available through the the Help pull-down in the latest version of the Fusion DIgital Power Designer GUI under the Documentation and Help Center pick.

Power management

Power management forum

Fusion Digital Power Designer User's Guide