LM2585: Pspice model.

Kengo.Y

Part Number: LM2585
Other Parts Discussed in Thread: TPS55340

Hi team.

My customer needs the Pspice model for LM2585.

If you have it, could you share it to me?

I can not found in your site(http://www.tij.co.jp/ja-jp/design-resources/design-tools-simulation/models-simulators/spice-library.html).

Sincerely.

Kengo.

over 5 years ago

0 Richard Fu22 over 5 years ago

TI__Mastermind 31015 points

Hi Kengo,

Per this thread, https://e2e.ti.com/support/tools/sim-hw-system-design/f/234/p/617858/2276051#2276051?jktype=e2e , it does not look like we have the PSPICE model. However, what you can do is simulate your design in WeBench, which already has SPICE sims built into the tool.

Thanks,

Richard

0 Kengo.Y over 5 years ago in reply to Richard Fu22

Guru 11165 points

Hi Richard.

Thank you for your reply.

What should I do about the simulation that WeBench can not be done?

I want to simulate a circuit I posted before.

https://e2e.ti.com/support/power-management/f/196/t/900732

Sincerely.

Kengo.

0 Richard Fu22 over 5 years ago in reply to Kengo.Y

TI__Mastermind 31015 points

Hi Kengo,

We currently do not have a model for the flyback topology using the LM2585, however it may be in the pipeline. However, we do have a PSPICE model for the TPS55340, which has the transient and average SPICE model and can be also used in the flyback configuration that you are currently using for the LM2585.

Thanks,

Richard

Power management

Power management forum

LM2585: Pspice model.