• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 63 subscribers
  • Views 436 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Original question:

BQ28Z610: bq28z610 1s application schematic

BQ28Z610: 1S Implementation, VC1/VC2 Pins

Jim G
Intellectual 685 points
Part Number: BQ28Z610

I've found this post requesting a reference schematic for a 1S implementation of BQ28Z610:

(https://e2e.ti.com/support/power-management/f/196/t/724945?tisearch=e2e-quicksearch&keymatch=bq28z610%201s

The suggestion is made to simply short VC1 and VC2 pins at the battery pack, but is this the only consideration?

Is any additional filtering or other steps needed for the IC to operate in a 1S configuration?