TLV713: tlv71333 in non-p version

HS FAE Germany

Part Number: TLV713

Hello,
customer needs the tlv71333 non-p version. Currently it is not orderable and not listed in the datasheet.

Regards, Holger

0 JCHK over 5 years ago

Hi Holger,

We have not released a version of the TLV713 with the active pull-down removed.

Can you share the application and why the active pull-down when disabled is not desired?

0 HS FAE Germany over 5 years ago in reply to JCHK

Hello JCHK,
customer don't need it. He uses a 47uF cap at the output and fears that the active pull-down can make some trouble.

Regards, Holger

0 JCHK over 5 years ago in reply to HS FAE Germany

Hi Holger,

The active pull-down when the device is disabled is ~120Ohm.

The maximum recommended COUT is 100uF so your customer appears to be well within the recommended operating range for the device.

Regards,

0 HS FAE Germany over 5 years ago in reply to JCHK

ok I will discuss this with customer. Btw, do you plan to release a non-p version? Is it still on your roadmap?

Regards, Holger

0 JCHK over 5 years ago in reply to HS FAE Germany

Hi Holger,

It is always an option if there is enough demand. So for we don't see much of a pull for the non-P version.

Please follow up directly if you would like to see this project started.

Power management forum