Other Parts Discussed in Thread: TINA-TI,
Hello,
I also have same question as below.
https://e2e.ti.com/support/tools/sim-hw-system-design/f/234/t/664614
Could you please send me unencrypted spice mode ?
Best Regards,
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hello,
I also have same question as below.
https://e2e.ti.com/support/tools/sim-hw-system-design/f/234/t/664614
Could you please send me unencrypted spice mode ?
Best Regards,
Ryuuichi,
I will check to see if we have an unencrypted model. You will probably need an up to date NDA to receive it. Can you provide it?
Hello John-san,
Thank you your reply.
>You will probably need an up to date NDA to receive it. Can you provide it?
Customer do not have NDA with TI. So, if you need NDA to provide unencrypted model of Pspice, please confirm that you can send us TINA-TI model instead.
(They can use TINA-TI, however you release only Pspice model for TPS62136.)
Best regards
Ryuuichi,
We only have the Pspice model. There is no TINA-TI model for it.
Hello John-san,
>I will check to see if we have an unencrypted model.
Could you send me status about above ?
BR,
Ryuuichi,
You already stated that the customer does not have an NDA, so I cannot provide any unencrypted models.
Hello,
Thank you for your reply.
However, since you said as shown below, I asked again.
>You will probably need an up to date NDA to receive it.
Is my understanding that you have already confirmed user definitely need NDA correct ?
Best Regards,