Dear team,
Would you kindly help provide the c code base on Linux system or RTOS system for bq24259?
Thanks.
Best regards,
Sammi
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Dear team,
Would you kindly help provide the c code base on Linux system or RTOS system for bq24259?
Thanks.
Best regards,
Sammi
Hi Ning,
Thanks for your reply.
During customer's test, the register shows it is not charging for a 3.8V battery. The register REG08=0X4D. I see the bit 7 is detected as USB host. I wonder if the USB host mode made the charger not charging. But as this is controlled by PSEL, how to control it? Or any other reason that may cause this issue?
Thanks.
Best regards,
Sammi
Sammi,
This is a duplicate question as https://e2e.ti.com/support/power-management/f/196/t/907219. The thread is considered closed.
Thanks,
Ning.